New edition with increased power and new design. Ideal professional saw where users demand rapid acceleration, maximum power and maneuverability. Excellent saw for high speed limbing and cross-cutting applications. Also perfect for felling small diameter trees.
Air Purge
Removes air from carburetor and fuel lines for easier starting.
Air Injection
Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.
Combined choke/stop control
Allows for easier starting and reduces the risk of engine flooding.
Magnesium crankcase
Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.
Snap-lock cylinder cover
Saves time when changing spark plugs and cleaning.
Three-piece crankshaft
Forged three-piece crankshaft for maximum durability for the toughest applications.
LowVib
Smart Start
Ergonomic Design
Front handle ergonomics
Engine specification
Cylinder displacement
50.1 cc
Power output
3.7 hp(I)
Idling speed
2700 rpm
Maximum power speed
9600 rpm
Cylinder bore
1.73 inch
Cylinder stroke
1.28 inch
Ignition system
SEM AM50
Ignition module air gap
0.01 "
Spark plug
NGK BPMR7A
Electrode gap
0.02 "
Carburetor model name
C3-EL32
Fuel tank volume
1.06 US pint
Oil tank volume
0.59 US pint
Oil pump type
Adjustable flow
Oil pump capacity
6-10 ml/min
Cutting equipment
Chain pitch
.325"
Recommended bar length, min-max
13"-20"
Chain speed at max power
60.7 fts
Emission, vibration & noise data
Sound level
106 dB(A)
Sound power level, LWA
113 dB(A)
Vibrations front handle
2.4 m/s²
Vibrations rear handle
3.6 m/s²
Overall dimensions
Weight (excl. cutting equipment)
11 lbs
Part Number
Description
MSRP*
965410410
16" Bar, .325" Pitch, .050" Gauge,
$ 489.95
The Husqvarna 357 XP™ is among our latest generation of professional saws. It's the perfect all-around saw for everything from felling, to limbing and to cross-cutting. High power and rapid acceleration in combination with superior ergonomics, low vibration levels and a slim body ensure both effectiveness and less effort. A lightweight, effective and reliable saw for demanding professional applications.
Ergonomic Design
7 degree offset handle and smooth, contoured body contribute to reducing operator fatigue.
Magnesium crankcase
Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.
Air Injection
Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.
Three-piece crankshaft
Forged three-piece crankshaft for maximum durability for the toughest applications.
Smart Start
The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
Front handle ergonomics
Better grip and a 7° offset handle reduces fatigue.
LowVib
Adjustable oil pump
Additional Features
Engine specification
Cylinder displacement
56.5 cc
Power output
4.4 hp(I)
Idling speed
2700 rpm
Maximum power speed
9600 rpm
Cylinder bore
1.81 inch
Cylinder stroke
1.34 inch
Ignition system
SEM AM50
Ignition module air gap
0.01 "
Spark plug
NGK BPMR7A
Electrode gap
0.02 "
Carburetor model name
HDA174
Fuel tank volume
1.44 US pint
Oil tank volume
0.8 US pint
Oil pump type
Adjustable flow
Oil pump capacity
5-15 ml/min
Cutting equipment
Chain pitch
.325" / 3/8"
Recommended bar length, min-max
13"-20"
Chain speed at max power
70.21 fts
Emission, vibration & noise data
Sound level
101 dB(A)
Sound power level, LWA
114 dB(A)
Vibrations front handle
3.9 m/s²
Vibrations rear handle
4.2 m/s²
Overall dimensions
Weight (excl. cutting equipment)
12.1 lbs
Part Number
Description
MSRP*
965551216
16" Bar, 3/8" Pitch, .050" Gauge, Assembly Required
$ 689.95
A true professional saw built for very demanding applications, including felling and general logging. The crankcase and crankshaft are extra heavy-duty and the carburetor has vibration dampening in order to handle high speeds and high loads. This saw combines low weight, high power and rapid acceleration with flexible operation.
Air Injection
Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.
LowVib
System designed to reduce vibration levels to the operator, which lessens fatigue.
Side-mounted chain tensioner
Easier access to chain tensioning device.
Three-piece crankshaft
Forged three-piece crankshaft for maximum durability for the toughest applications.
Magnesium crankcase
Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.
Ergonomic Design
7 degree offset handle and smooth, contoured body contribute to reducing operator fatigue.
Adjustable oil pump
Front handle ergonomics
Eco-pump
Engine specification
Cylinder displacement
70.7 cc
Power output
5.3 hp
Idling speed
2700 rpm
Maximum power speed
9600 rpm
Cylinder bore
1.97 inch
Cylinder stroke
1.42 inch
Ignition system
SEM AM50
Ignition module air gap
0.01 "
Spark plug
NGK BPMR7A
Electrode gap
0.02 "
Carburetor model name
HD68
Fuel tank volume
1.62 US pint
Oil tank volume
0.84 US pint
Oil pump type
Adjustable flow
Oil pump capacity
4-20 ml/min
Cutting equipment
Chain pitch
3/8"
Recommended bar length, min-max
15"-28"
Chain speed at max power
70.21 fts
Emission, vibration & noise data
Sound level
103 dB(A)
Sound power level, LWA
115 dB(A)
Vibrations front handle
3.5 m/s²
Vibrations rear handle
4 m/s²
Overall dimensions
Weight (excl. cutting equipment)
13.4 lbs
Part Number
Description
MSRP*
965702306
18" Bar, 3/8" Pitch, .058" Gauge, Assembly Required
$ 799.95
New edition for professional use. Ideal felling and general logging saw. The 575XP is engineered with X-TORQ delivering high torque even at low rpms. X-TORQ Technology also provides even more fuel efficiency than other saws in its class. The 575XP will increase productivity and reduce fuel costs, while providing more power when you need it
Air Injection
Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.
Heavy-Duty Air Filter
This easily accessible filter is designed to handle the high volume of airflow specific to a large professional saw.
Optimized saw body
No protruding parts, a smooth underside, rounded starter cover and well-protected controls all make the saw easy to handle.
Improved handle design
The rear handle is asymmetrically designed with comfort inserts for a more stable and less tiring grip.
X-TORQ
The X-TORQ engine technology reduces emissions by 60% and increases fuel efficiency by 20%.
Side-mounted chain tensioner
Easier access to chain tensioning device.
Snap-lock cylinder cover
Three-piece crankshaft
Smart Start
Front handle ergonomics
Engine specification
Cylinder displacement
73.5 cc
Power output
5.8 hp
Idling speed
2700 rpm
Maximum power speed
9600 rpm
Maximum recommended engine speed
13600 rpm
Cylinder bore
2.01 inch
Cylinder stroke
1.42 inch
Ignition system
SEM AM50
Ignition module air gap
0.02 "
Spark plug
-
Electrode gap
0.02 "
Carburetor model name
ZAMA C1M-EL28
Fuel tank volume
1.48 US pint
Oil tank volume
0.78 US pint
Oil pump type
Adjustable flow
Oil pump capacity
5-22 ml/min
Cutting equipment
Recommended bar length, min-max
16"-28"
Chain speed at max power
70.21 fts
Emission, vibration & noise data
Sound level
107 dB(A)
Sound power level, LWA
115 dB(A)
Vibrations front handle
3.2 m/s²
Vibrations rear handle
3.4 m/s²
Overall dimensions
Weight (excl. cutting equipment)
14.5 lbs
Part Number
Description
MSRP*
965760219
18" Bar, 3/8" Pitch, .058" Gauge, Assembly Required
$ 784.95
A true professional saw built for very demanding applications, including felling and general logging. The 385 XP™ is engineered for higher horsepower in tougher conditions, like larger diameter timber. The crankcase and crankshaft are extra heavy-duty and the carburetor has vibration damping in order to handle high speeds and high loads. This saw combines low weight, high power and rapid acceleration with flexible operation.
Air Injection
Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.
LowVib
System designed to reduce vibration levels to the operator, which lessens fatigue.
Magnesium crankcase
Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.
Three-piece crankshaft
Forged three-piece crankshaft for maximum durability for the toughest applications.
Smart Start
The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
Quick release air filter cover
Quick release cover saves time when cleaning or changing spark plug or filter.
Felling marks
Engine specification
Cylinder displacement
84.7 cc
Power output
6.3 hp(I)
Idling speed
2700 rpm
Maximum power speed
9600 rpm
Cylinder bore
2.13 inch
Cylinder stroke
1.46 inch
Ignition system
SEM AM50
Ignition module air gap
0.01 "
Spark plug
Champion RCJ 7Y
Electrode gap
0.02 "
Carburetor model name
HS290
Fuel tank volume
1.9 US pint
Oil tank volume
1.06 US pint
Oil pump type
Adjustable flow
Oil pump capacity
4-20 ml/min
Cutting equipment
Chain pitch
3/8"
Recommended bar length, min-max
18"-28"
Chain speed at max power
70.21 fts
Emission, vibration & noise data
Sound level
102 dB(A)
Sound power level, LWA
114 dB(A)
Vibrations front handle
5.7 m/s²
Vibrations rear handle
8 m/s²
Overall dimensions
Weight (excl. cutting equipment)
15.4 lbs
Part Number
Description
MSRP*
965830220
20" Bar, 3/8" Pitch, .050" Gauge, Assembly Required
$ 919.95
A very powerful saw from our latest generation of large professional saws. The 390XP is engineered with the professional logger in mind. Designed for the most demanding conditions a logger may face. Performance is increased while vibration is diminished through Husqvarna's two-mass principle isolating the engine from the handles. Excellent ergonomics and low power-to-weight ratio makes the 390XP very desirable on the work site.
Quick release air filter cover
Quick release cover saves time when cleaning or changing spark plug or filter.
Air Injection
Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.
LowVib
System designed to reduce vibration levels to the operator, which lessens fatigue.
Three-piece crankshaft
Forged three-piece crankshaft for maximum durability for the toughest applications.
Ergonomic Design
7 degree offset handle and smooth, contoured body contribute to reducing operator fatigue.
Adjustable oil pump
Allows you to control oil flow depending on application and weather conditions.
Front handle ergonomics
Engine specification
Cylinder displacement
87.9 cc
Power output
6.5 hp(I)
Idling speed
2700 rpm
Maximum power speed
9600 rpm
Cylinder bore
2.17 inch
Cylinder stroke
1.5 inch
Ignition system
SEM AM50
Ignition module air gap
0.01 "
Spark plug
Champion RCJ 7Y
Electrode gap
0.02 "
Carburetor model name
HS296A
Fuel tank volume
1.9 US pint
Oil tank volume
1.06 US pint
Oil pump type
Adjustable flow
Oil pump capacity
6-24 ml/min
Cutting equipment
Chain pitch
3/8"
Recommended bar length, min-max
18"-28"
Chain speed at max power
70.21 fts
Emission, vibration & noise data
Sound pressure
106 dB(A)
Sound pressure (15m)
83 dB(A)
Vibrations front handle
3.5 m/s²
Vibrations rear handle
6.2 m/s²
Overall dimensions
Weight (excl. cutting equipment)
15.7 lbs
Part Number
Description
MSRP*
965060720
20" Bar, 3/8" Pitch, .050" Gauge, Assembly Required
$ 1,029.95
A very powerful saw from our latest generation of large professional saws. The 395XP is engineered with the professional logger in mind. Designed for the most demanding conditions a logger may face. The 395XPG is unique due to its more rugged handle design, more aggressive clutch, and wider clutch cover for better dispersal of wood chips. This saw also has the power and balance to take longer bar lengths. Equipped with heated handles for greater comfort in cold and wet conditions.
Quick release air filter cover
Quick release cover saves time when cleaning or changing spark plug or filter.
Air Injection
Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.
LowVib
System designed to reduce vibration levels to the operator, which lessens fatigue.
Magnesium crankcase
Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.
Heated handles
Efficient heating coils in the front and rear handles make the saw more comfortable to use in cold and damp conditions.
Three-piece crankshaft
Forged three-piece crankshaft for maximum durability for the toughest applications.
Smart Start
Felling marks
Front handle ergonomics
Engine specification
Cylinder displacement
93.6 cc
Power output
7.1 hp(I)
Idling speed
2500 rpm
Maximum power speed
9600 rpm
Cylinder bore
2.2 inch
Cylinder stroke
1.5 inch
Ignition system
SEM AM50
Ignition module air gap
0.01 "
Spark plug
NGK BPMR7A
Electrode gap
0.02 "
Carburetor model name
HS300A
Fuel tank volume
1.9 US pint
Oil tank volume
1.1 US pint
Oil pump type
Adjustable flow
Oil pump capacity
14-21 ml/min
Cutting equipment
Chain pitch
3/8"
Recommended bar length, min-max
18"-36"
Chain speed at max power
64.3 fts
Emission, vibration & noise data
Sound level
102 dB(A)
Sound power level, LWA
111 dB(A)
Vibrations front handle
6.5 m/s²
Vibrations rear handle
10.2 m/s²
Overall dimensions
Weight (excl. cutting equipment)
17.4 lbs
Part Number
Description
MSRP*
965902504
20" Bar, 3/8" Pitch, .058" Gauge, Assembly Required
$ 1,129.95
Our largest saw is one of the most powerful in the world. The primary applications for the 3120 XP™ is extreme logging, portable saw mills, and stump work. This saw is designed to pull the chain on our longest bars-- up to six feet! Like all Husqvarna saws, the 3120 XP™ has a superior power/weight ratio. Combine Smart Start with LowVib and other ergonomic features, this heavy-duty saw is both easy to start and operate. XP™
Inertia activated chain brake
Reduces the likelihood of injury due to kickback.
LowVib
System designed to reduce vibration levels to the operator, which lessens fatigue.
Magnesium crankcase
Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.
Three-piece crankshaft
Forged three-piece crankshaft for maximum durability for the toughest applications.
Smart Start
The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
Felling marks
Distinct, colored marks used for aiming the direction of timber fall.
